
移動式登車橋
產品系列:登車橋移動式登車橋
產品詳情




移動式登車橋用于現場無裝卸貨平臺或需要流動裝卸貨物的場所,是與叉車配合使用的貨物裝卸輔助設備,移動式登車橋為一個移動的鋼結構斜坡,裝卸叉車可實現直接駛入卡車車廂內部進行批量裝卸作業,解決了貨車車廂與地面存在高度差叉車或人力無法直接裝卸問題。
產品特點:
-動力分為手動和電動液壓,電動泵站電壓通常為220;
-設備載荷從4噸到15噸,高度調節范圍為0.80-1.70米
-移動式液壓登車橋實現貨物的安全快速裝卸,成倍提高裝卸作業效率,適用于拖車、半掛車、貨運站臺等物流環節;
-為出口企業裝在集裝箱提供方便,無可替代;
-隨時轉移到工作位置,簡單、便捷、省時、省力、大幅節省物流成本;
When your needs would move a fork truck or vehicle up into or out of a building or other dock height structure, you need a stationary yard ramp
When you need to move into or out of a van, box or container you have the same decision elements plus the need for a level off zone at the top before your load enters or leaves the truck
-Yard ramps help you handle freight faster off trailers!
-Yard ramps help you handle freight faster off railcars!
-Yard ramps help you handle freight faster off docks!
-Wherever you need it, yard ramps move there easily!
-Yard Ramps save you money everywhere you put it!
-YARD RAMPS cost less than the alternatives!
-YARD RAMPS delivers the best value!
-Load capacity from 4 to 15 tons
-Lifting height ranges from 0.8-1.70 meters
-Powered by Hand pump or electric power pack,in case of power pack the power supply is usually 220V,single phase.
技術參數
型號 Model No. |
載重 Machine WT. |
臺面尺寸 Table Size |
工作高度 Height Range |
設備自重 Machine Size |
設備動力 Power Supply |
YDCQ-6 | 6000kg | 10500×2000mm | 900-1700mm | 2800kg | 手動或220V Hand Pump or 220V motor |
YDCQ-8 | 8000kg | 10500×2000mm | 900-1700mm | 3000kg | |
YDCQ-10 | 10000kg | 10500×2000mm | 900-1700mm | 3300kg | |
YDCQ-12 | 12000kg | 10500×2000mm | 900-1700mm | 3300kg | |
YDCQ-14 | 14000kg | 10500×2000mm | 900-1700mm | 3800kg | |
YDCQ-16 | 16000kg | 10500×2000mm | 900-1700mm | 4500kg |
升降機
上一篇:固定式登車橋
下一篇:液壓登車橋